How to Install an Oil Pressure Switch on 2008 Chrysler PT Cruiser?

Begin the installation of the oil pressure sender by putting on the oil pressure switch 3 and connecting the electrical connector first. After that, reduce the height of the vehicle. Turn the engine on and make sure it runs for at least 2 minutes. When you are done, close the engine and check the oil, changing it if required.

OEM 2008 Chrysler PT Cruiser Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 Chrysler PT Cruiser Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2008 Chrysler PT Cruiser Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch on 2008 Chrysler PT Cruiser?
A: Begin the installation of the oil pressure sender by putting on the oil pressure switch 3 and connecting the electrical connector first. After that, reduce the height of the vehicle. Turn the engine on and make sure it runs for at least 2 minutes. When you are done, close the engine and check the oil, changing it if required.