How to Service a Brake Light Switch on 2008 Chrysler PT Cruiser?

Lift up the air cleaner cover and unfasten it with the two clips; then, place it aside. After that, remove the negative battery cable from its connection to the battery. Take off the silencer pad below the knee blocker, then pull down the one below the steering column and remove it. To take out the brake lamp switch, turn it counterclockwise by about 30 degrees and pull it rearward. Cut the brake cable wires away from the brake lamp switch, as using it again would be wrong.

OEM 2008 Chrysler PT Cruiser Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Chrysler PT Cruiser Switch Package - Stop Lamp Part Number: 5083344AB
Product Specifications
- Other Name: SW PKG-STOP LAMP
- SKU: 5083344AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

2008 Chrysler PT Cruiser Brake Light Switch Parts and Q&A

Q: How to Service a Brake Light Switch on 2008 Chrysler PT Cruiser?
A: Lift up the air cleaner cover and unfasten it with the two clips; then, place it aside. After that, remove the negative battery cable from its connection to the battery. Take off the silencer pad below the knee blocker, then pull down the one below the steering column and remove it. To take out the brake lamp switch, turn it counterclockwise by about 30 degrees and pull it rearward. Cut the brake cable wires away from the brake lamp switch, as using it again would be wrong.