Other Name: Airbag - Seat; Seat Heater Control Module, Front; Seat Heater Control Module; Seat Air Bag, Front; Side Impact Inflator Module; Side Air Bag; Module; Air Bag Seat
Position: Front
Replaces: 5175666AA, 52029313AA, 52029312AA
Item Weight: 2.40 Pounds
Item Dimensions: 14.5 x 5.8 x 5.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4645986AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
2008 Chrysler Sebring Air Bag Parts and Q&A
Q: How Is the Passenger Air Bag Installed on 2008 Chrysler Sebring?
A: Put the passenger air bag into the top pad and slide one of the hooks into each retaining window. Lay the PAB down on the top pad so that the hooks are pushed into the loops or tabs. Next, it's time to install the instrument panel top pad. Guarantee that the two fasteners are inserted through the PAB and then fasten them, applying 9.5 Nm of torque (84 in. lbs.). Attach the squib connectors from the PAB and then put the glove box in place. Failure to test the equipment first and only then connect the negative cable of the battery may result in severe or fatal injury.