How to Safely Install an Air Bag Sensor on the B-Pillar on 2008 Chrysler Sebring?

Mount the sensor to the B-pillar and insert a screw through it, tightening it firmly to 8 Nm (71 in. lbs.), with the anti-rotation pin from the sensor going into the hole just below the mounting hole in the pillar. Plug the sensor's electrical connector into the motor. Put in the B-pillar lower trim panel. Do not attach the negative cable to the battery until you have done the system test; failure to do this may lead to serious or fatal results.

OEM 2008 Chrysler Sebring Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
2008 Chrysler Sebring Air Bag Sensor, Front Part Number: 4896061AB
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front, Rear; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact
- Position: Front
- Replaces: 4672311AA, 52851601AB, 4896061AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.2 x 1.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Chrysler Sebring Impact Sensor, Outer Part Number: 4896065AB
$194.09 MSRP: $274.00
You Save: $79.91 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Outer; Air Bag Sensor; Side Impact Sensor; Side Sensor; Sensor Impact
- Position: Outer
- Replaces: 4896065AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896065AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2008 Chrysler Sebring Air Bag Sensor Parts and Q&A

Q: How to Safely Install an Air Bag Sensor on the B-Pillar on 2008 Chrysler Sebring?
A: Mount the sensor to the B-pillar and insert a screw through it, tightening it firmly to 8 Nm (71 in. lbs.), with the anti-rotation pin from the sensor going into the hole just below the mounting hole in the pillar. Plug the sensor's electrical connector into the motor. Put in the B-pillar lower trim panel. Do not attach the negative cable to the battery until you have done the system test; failure to do this may lead to serious or fatal results.