Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
| Page 1 of 3 |Next >
1-20 of 56 Results
2008 Chrysler Sebring Seat Cover Parts and Q&A
Q: How to Install a Seat Cover on 2008 Chrysler Sebring?
A: First, put the cover on the seat back and add in the new head restraint sleeve guides. Once you have fully covered the design, roll down the material to where you will install hog rings, then attach the back frame to the foam pad with the hog rings. Then place the air bag part into the seat base, let the cover slip downwards, engage the strap and zip shut the cover. Put the J-strap retainer in place and fit the lumbar support handle if your car is so equipped. Screw the seat back into place on the seat cushion frame with the recliner bolts tightened to 40 Nm (30 ft. lbs.) and the pivot bolts tightened to 12 Nm (9 ft. lbs.). After that, put the seat in the vehicle, fix the headrest and test the seat and its headrest.