Position the seat cover over the foam, checking at the same time that the heating and connection parts are safe. Pinch the fabric to line it up with the pockets in the foam and secure it to the bottom foam with a few hog rings. After that, attach the seat foam and cover to the pan, connecting the J-hook so the seat cover fits around the
Seat Cushion. Thread the wiring harness into the seat pan and, if every seat is heated, fix the heated seat connector to the control panel. Fit the seat bolts, turning them to 11 Nm (8 ft.lbs.) when done, then snap the seat to the back and fasten the seat in the vehicle.