How to Remove the A/C Accumulator on 2008 Chrysler Town & Country?

Digital error lights usually require you to disconnect and cut off the negative battery cable to remove the A/C accumulator. After that, recover refrigerant from its system. After that, take out the air cleaner housing and inlet duct from the engine compartment. Next, separate the liquid line at both front and rear ends which are 1 and 2, from the A/C accumulator part number 4. Afterward, unfasten and remove the bolt, listed as number 3, maintaining the A/C accumulator to the engine compartment.

OEM 2008 Chrysler Town & Country A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

View related parts
2008 Chrysler Town & Country Dehydrator Part Number: 68031863AA
Product Specifications
- Other Name: Drier - Receiver; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Drier; Drier Receiver
- Item Weight: 1.50 Pounds
- Item Dimensions: 3.5 x 6.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68031863AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country A/C Accumulator Parts and Q&A

Q: How to Remove the A/C Accumulator on 2008 Chrysler Town & Country?
A: Digital error lights usually require you to disconnect and cut off the negative battery cable to remove the A/C accumulator. After that, recover refrigerant from its system. After that, take out the air cleaner housing and inlet duct from the engine compartment. Next, separate the liquid line at both front and rear ends which are 1 and 2, from the A/C accumulator part number 4. Afterward, unfasten and remove the bolt, listed as number 3, maintaining the A/C accumulator to the engine compartment.