How to Install a Brake Fluid Level Sensor on 2008 Chrysler Town & Country?

Install the brake fluid level sensor by putting the sensor switch in the left side of the reservoir, pushing it in until the retaining tab in it locks. Plug the brake fluid level switch (1) into the wiring harness connector (2) that you attached previously.

OEM 2008 Chrysler Town & Country Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2008 Chrysler Town & Country Level Sensor Part Number: 5175094AA
$10.79 MSRP: $15.50
You Save: $4.71 (31%)
Product Specifications
- Other Name: Sensor - Brake Fluid Level; Brake Fluid Level Switch; Fluid Level Sensor; Fluid Level Switch; Sensor Brake Fluid Level
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 0.7 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175094AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Brake Fluid Level Sensor Parts and Q&A

Q: How to Install a Brake Fluid Level Sensor on 2008 Chrysler Town & Country?
A: Install the brake fluid level sensor by putting the sensor switch in the left side of the reservoir, pushing it in until the retaining tab in it locks. Plug the brake fluid level switch (1) into the wiring harness connector (2) that you attached previously.