How to Install an Exhaust Hanger on 2008 Dodge Caliber?

To install the exhaust pipe/muffler hanger, attach the isolator bracket to the underbody with screws, tightening to 8.5 Nm (75 in. lbs.) and 3.7 Nm (33 in. lbs.). Connect the isolator, start the engine to check for leaks, and adjust for any contact with body panels.

OEM 2008 Dodge Caliber Exhaust Hanger

Exhaust Tail Pipe Hanger

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Exhaust Hangers found

View related parts
2008 Dodge Caliber Rear Insulator Part Number: 5105110AB
$5.79 MSRP: $8.65
You Save: $2.86 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Exhaust; Rear Muffler Bracket Insulator; Exhaust System Hanger; Muffler Hanger Strap.; Muffler & Pipe Hanger; Front Insulator; Insulator; Isolator Exhaust Muffler To Body; Isolator Exhaust
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5105110AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Dodge Caliber Rear Insulator, Front Part Number: 4766177AA
$7.95 MSRP: $11.55
You Save: $3.60 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator - Exhaust; Muffler Bracket Insulator, Front; Exhaust System Hanger; Muffler Hanger Strap.; Muffler & Pipe Hanger; Front Insulator; Insulator; Isolator Exhaust
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4766177AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS

2008 Dodge Caliber Exhaust Hanger Parts and Q&A

Q: How to Install an Exhaust Hanger on 2008 Dodge Caliber?
A: To install the exhaust pipe/muffler hanger, attach the isolator bracket to the underbody with screws, tightening to 8.5 Nm (75 in. lbs.) and 3.7 Nm (33 in. lbs.). Connect the isolator, start the engine to check for leaks, and adjust for any contact with body panels.