How to Service and Repair the Canister Purge Valve on 2008 Dodge Caliber?

For canister purge valve repairs, start by isolating the negative battery cable at its place at the battery. After that, unclip connector 4 from canister purge valve 1 and remove hose 3 from the valve. Next, disconnect quick connect fuel tank hose 2 from canister purge valve 1 and finally pull the tab to take out canister purge valve 1 from body bracket 5.

OEM 2008 Dodge Caliber Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2008 Dodge Caliber Purge Valve Part Number: 4669569
Product Specifications
- Other Name: Solenoid - Proportional Purge; Vapor Canister Purge Solenoid; Purge Solenoid; EGR Solenoid; Proportional and Linear Purge Solenoids.
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669569
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber Canister Purge Valve Parts and Q&A

Q: How to Service and Repair the Canister Purge Valve on 2008 Dodge Caliber?
A: For canister purge valve repairs, start by isolating the negative battery cable at its place at the battery. After that, unclip connector 4 from canister purge valve 1 and remove hose 3 from the valve. Next, disconnect quick connect fuel tank hose 2 from canister purge valve 1 and finally pull the tab to take out canister purge valve 1 from body bracket 5.