How to Remove and Replace a Piston and Connecting Rod on 2008 Dodge Challenger?

To change the piston and connecting rod, release fuel pressure, disconnect battery and remove engine covers. Remove air ducts and sensors and the cylinder head and engine mounts. Use an engine lift to remove oil pan and timing chain cover. Mark rod positions and remove pistons and install bearing caps immediately.

OEM 2008 Dodge Challenger Piston

Engine Pistons

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pistons found

View related parts
2008 Dodge Challenger Piston Part Number: 68031891AD
Product Specifications
- Other Name: Piston Pin And Rod
- Replaces: 68031891AC, 68031891AA
- Item Weight: 3.10 Pounds
- Item Dimensions: 12.8 x 5.7 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 68031891AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Challenger Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Challenger Piston Part Number: 68031890AD
Product Specifications
- Other Name: Engine Piston Set; Cast Piston Set; Piston Pin And Rod
- Replaces: 68031890AC, 68031890AA, 5037490AB
- Item Weight: 3.50 Pounds
- Item Dimensions: 12.3 x 5.7 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 68031890AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Challenger Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

2008 Dodge Challenger Piston Parts and Q&A

Q: How to Remove and Replace a Piston and Connecting Rod on 2008 Dodge Challenger?
A: To change the piston and connecting rod, release fuel pressure, disconnect battery and remove engine covers. Remove air ducts and sensors and the cylinder head and engine mounts. Use an engine lift to remove oil pan and timing chain cover. Mark rod positions and remove pistons and install bearing caps immediately.