JeepParts
My Garage
My Account
Cart
OEM 2008 Dodge Challenger Steering Knuckle
Front Steering Knuckle- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Steering Knuckles found
2008 Dodge Challenger Knuckle, Front Driver Side Part Number: 5290547AB
$796.92 MSRP: $1160.00You Save: $363.08 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 24.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290547AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Challenger Knuckle, Front Passenger Side Part Number: 5290539AB
$796.92 MSRP: $1160.00You Save: $363.08 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 21.80 Pounds
- Item Dimensions: 22.3 x 8.4 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290539AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Product Specifications- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Right
- Position: Rear Passenger Side
- Replaces: 4854458AB, 4854458AA, 4854458AC, 4854458AD
- Item Weight: 13.80 Pounds
- Item Dimensions: 13.2 x 12.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68248386AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
- Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Left
- Position: Rear Driver Side
- Replaces: 4854459AD, 4854459AC, 4854459AB, 4854459AA
- Item Weight: 5.60 Pounds
- Item Dimensions: 12.8 x 12.5 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68248387AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Challenger Steering Knuckle Parts and Q&A
- Q: How to Disassemble the Front Steering Knuckle with Ball Joint Press C-4212F on 2008 Dodge Challenger?A: For best results, mount Ball Joint Press C-4212F in a vise when taking apart the front steering knuckle. Clip Ball Joint Remover/Installer 9320 into the cup area of Ball Joint Press C-4212F and tighten the set screw. Screw the end of the screw-drive on Ball Joint Press C-4212F with Ball Joint Remover/Installer 9320-3. Use a pair of snap-ring pliers to take out the snap-ring from the ball joint's bottom. First, put Support Clamp 1670-37 on top of the ball joint and the Ball Joint Remover/Installer 9320-1 around the knuckle so they are aligned. Then, snug the Support Clamp screws you get on top from underneath the vehicle. Hold the knuckle over the tools and make sure the Remover reaches the bugger inside the Receiver from above. Now, hand tighten the Press screw-drive until the Remover rests on the bottom of the ball joint. Set the Receiver into the recessed part of Support Clamp, Ball Joint Remover/Installer 9320-1. From the bottom, press the Press screw-drive to ease the ball joint from the knuckle and down the Receiver. First, loosen the screw-drive and detach the knuckle from the Press, after that remove the ball joint from the Receiver. After that, unscrew and remove the Support Clamp from the knuckle.
Related 2008 Dodge Challenger Parts
2008 Dodge Challenger Shock Absorber
2008 Dodge Challenger Sway Bar Link
2008 Dodge Challenger Bump Stop
2008 Dodge Challenger Coil Spring Insulator
2008 Dodge Challenger Control Arm Bolt
2008 Dodge Challenger Crossmember Bushing
2008 Dodge Challenger Lateral Link
2008 Dodge Challenger Leaf Spring Bushing
2008 Dodge Challenger Sway Bar Bracket
2008 Dodge Challenger Sway Bar Kit
2008 Dodge Challenger Wheel Cover
2008 Dodge Challenger Wheel Hub