How to Service and Repair a Rear Parking Brake Cable on 2008 Dodge Charger?

Raise and put the vehicle on a stand, making sure you comply with safety procedures for brakes. Near the front cable, disconnect the rear parking brake cable from the other cable; at equalizer 2 above the rear axle, release cable 1 for the left cable and at connector 3 above the axle, release cable 4 for the right cable. Take out the parking brake shoes from the side of cable service, then remove the shoe actuator lever 1 from cable 2 and support it. After that, undo screw 4 and lift the cable out of knuckle 3. Cable 2 should be taken from routing guide 1. Attach the 13 mm 12-point box wrench 4 to one strand of the cable and completely onto the cable retainer 3 which is fastened to the bracket at the left and right. If needed, jiggle the wrench to make the fingers of the retainer shorter, then pull the cable out of the bracket. In the end, take the parking brake cable out of the vehicle.

OEM 2008 Dodge Charger Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2008 Dodge Charger Rear Cable Part Number: 5290824AB
$48.39 MSRP: $70.85
You Save: $22.46 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5290824AA, 4779260AD
- Item Weight: 1.00 Pounds
- Item Dimensions: 31.9 x 6.3 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290824AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Charger Front Cable Part Number: 4779239AH
$64.33 MSRP: $93.55
You Save: $29.22 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 4779239AG, 4779239AF
- Item Weight: 2.80 Pounds
- Item Dimensions: 43.8 x 43.7 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4779239AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Charger Rear Cable Part Number: 4779322AH
$44.60 MSRP: $64.40
You Save: $19.80 (31%)
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Front Cable; Cable Parking Brake
- Replaces: 4779322AG, 4779322AC, 4779322AF, 4779322AB, 4779322AE, 4779322AD
- Item Weight: 1.50 Pounds
- Item Dimensions: 32.2 x 1.8 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4779322AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- GT, GT Plus, Pursuit, R/T, SE, SXT | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS

2008 Dodge Charger Parking Brake Cable Parts and Q&A

Q: How to Service and Repair a Rear Parking Brake Cable on 2008 Dodge Charger?
A: Raise and put the vehicle on a stand, making sure you comply with safety procedures for brakes. Near the front cable, disconnect the rear parking brake cable from the other cable; at equalizer 2 above the rear axle, release cable 1 for the left cable and at connector 3 above the axle, release cable 4 for the right cable. Take out the parking brake shoes from the side of cable service, then remove the shoe actuator lever 1 from cable 2 and support it. After that, undo screw 4 and lift the cable out of knuckle 3. Cable 2 should be taken from routing guide 1. Attach the 13 mm 12-point box wrench 4 to one strand of the cable and completely onto the cable retainer 3 which is fastened to the bracket at the left and right. If needed, jiggle the wrench to make the fingers of the retainer shorter, then pull the cable out of the bracket. In the end, take the parking brake cable out of the vehicle.