Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Dodge Dakota Brake Caliper

Caliper
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Calipers found

  • 2008 Dodge Dakota Brake Caliper - 68157610AB
    2008 Dodge Dakota Brake Caliper Diagram - 68157610AB
    View related parts

    2008 Dodge Dakota Caliper, Front Driver Side Part Number: 68157610AB

    $206.94 MSRP: $308.00
    You Save: $101.06 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left, Front Right; Brake Caliper
    • Position: Front Driver Side
    • Replaces: 68002703AA, 5143348AF, 5143348AD, 5143348AE, 68037144AA, 68157610AA
    • Item Weight: 11.10 Pounds
    • Item Dimensions: 11.4 x 6.9 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68157610AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2008 Dodge Dakota Brake Caliper - 68157611AB
    2008 Dodge Dakota Brake Caliper Diagram - 68157611AB
    View related parts

    2008 Dodge Dakota Caliper, Front Driver Side Part Number: 68157611AB

    $201.28 MSRP: $299.00
    You Save: $97.72 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left, Front Right; Brake Caliper
    • Position: Front Driver Side
    • Replaces: 5143358AD, 68037147AA, 5143358AF, 5143358AE, 68002702AA, 68157611AA
    • Item Weight: 11.80 Pounds
    • Item Dimensions: 11.7 x 6.5 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68157611AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Dakota Brake Caliper Parts and Q&A

  • Q: How to Properly Install a Brake Caliper on 2008 Dodge Dakota?
    A: Avoid using petroleum-based grease; only rub non-petroleum based grease on any rubber parts when installing the disc brake caliper. Clean the slide pin bores completely to get rid of leftover grease and then use either the grease provided or Dow Corning-807(R) grease. Thoroughly coat the slide pins (3) on every surface they will touch by applying oil. Then, mount the elevator (2) to the slide pin (3) and put it into the adapter (1). Drive the pin through the adapter all the way and carefully press down on the boot close to the slide pin head to let out trapped air. Be sure to coat the banjo bolt with a new copper washer during installation. Join the disc brake caliper (1) to the brake caliper adapter (2) and next fit the new banjo bolt (4) and washers onto the caliper (6). Tighten the bolt to 28 Nm (250 in. lbs.). After that, put in the caliper slide pin bolts (2) and tighten them to 32 Nm (24 ft. lbs.). After that, bleed the base brake system, fit the tire and wheel assembly and bring the vehicle down to the ground.

Related 2008 Dodge Dakota Parts

Alternate Year Models

+
2007 Dodge Dakota Brake Caliper 2009 Dodge Dakota Brake Caliper