How to Service the EGR Valve on 2008 Dodge Dakota?

Before servicing the EGR Control Solenoid, read any Diagnostic Trouble Codes saved using your diagnostic scan tool. Take the negative battery cable off the battery. The next part is to remove the EVAP purge solenoid, as it lifts from its bracket. With the two tube mounting bolts loosened, remove the tube from the solenoid by pulling the end opposite the intake manifold. Get rid of the gasket found between the EGR valve solenoid and the tube flange and pull on the electrical connector at the solenoid. After that, eliminate both EGR valve solenoid mounting bolts and disconnect the solenoid from the engine. After cleaning the solenoid, get rid of the gasket underneath it.

OEM 2008 Dodge Dakota EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 EGR Valves found

View related parts
2008 Dodge Dakota EGR Valve Part Number: 53034192AB
$292.31 MSRP: $434.00
You Save: $141.69 (33%)
ADD TO CART
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve; Valve EGR
- Replaces: 53034192AA, 53032948AD, 53032948AC
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.2 x 4.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53034192AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Dodge Dakota Valve - EGR Part Number: CNHNX631AA
$57.05 MSRP: $83.95
You Save: $26.90 (33%)
ADD TO CART
Product Specifications
- Other Name: VALVE-EGR
- Item Weight: 2.70 Pounds
- Item Dimensions: 6.6 x 6.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CNHNX631AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 4.7L V8, 8 Cyl 4.7 L FLEX

2008 Dodge Dakota EGR Valve Parts and Q&A

Q: How to Service the EGR Valve on 2008 Dodge Dakota?
A: Before servicing the EGR Control Solenoid, read any Diagnostic Trouble Codes saved using your diagnostic scan tool. Take the negative battery cable off the battery. The next part is to remove the EVAP purge solenoid, as it lifts from its bracket. With the two tube mounting bolts loosened, remove the tube from the solenoid by pulling the end opposite the intake manifold. Get rid of the gasket found between the EGR valve solenoid and the tube flange and pull on the electrical connector at the solenoid. After that, eliminate both EGR valve solenoid mounting bolts and disconnect the solenoid from the engine. After cleaning the solenoid, get rid of the gasket underneath it.