How is the EGR Valve Installed on a 3.7L Engine on 2008 Dodge Durango?

Before fitting the EGR valve to your 3.7L engine, first clean the area where the valve gasket will be placed at the rear of the left cylinder head, as well as the EGR tube. Following this, insert a gasket over the EGR valve and between the valve and cylinder head, then attach the EGR valve to the cylinder head with two bolts, secure both with a torque of 9 Nm (80 in. lbs.). Once you have done that, fit a new gasket to the EGR tube flange and the EGR valve assembly, locate the EGR tube towards the side of the EGR valve and attach the tube's end into the intake manifold using two bolts tightened to 11 Nm (8.5 ft. lbs.). Attach the electrical connector to the top of the EGR valve solenoid, afterward insert the windshield wiper motor and secure the plastic cowl panel. After that, attach the battery's negative cable and run a diagnostic scan to clear any previous DTC downcodes stored by the computer.

OEM 2008 Dodge Durango EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 EGR Valves found

View related parts
2008 Dodge Durango EGR Valve Part Number: 53034192AB
$292.31 MSRP: $434.00
You Save: $141.69 (33%)
ADD TO CART
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve; Valve EGR
- Replaces: 53034192AA, 53032948AD, 53032948AC
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.2 x 4.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53034192AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Dodge Durango EGR Valve Part Number: 53032509AN
$352.91 MSRP: $495.00
You Save: $142.09 (29%)
ADD TO CART
Product Specifications
- Other Name: Valve - EGR; Exhaust Gas Recirculation (EGR) Valve; Exhaust Gas Recirculation Valve
- Replaces: 53032509AI, 53032509AF, 53032209AE, 53032509AJ, 53032509AM, 53032509AL, 53032509AG, 53032509AH
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.9 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032509AN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Valve - EGR Part Number: CNHNX631AA
$57.05 MSRP: $83.95
You Save: $26.90 (33%)
ADD TO CART
Product Specifications
- Other Name: VALVE-EGR
- Item Weight: 2.70 Pounds
- Item Dimensions: 6.6 x 6.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: CNHNX631AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, SLT, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Durango EGR Valve Parts and Q&A

Q: How is the EGR Valve Installed on a 3.7L Engine on 2008 Dodge Durango?
A: Before fitting the EGR valve to your 3.7L engine, first clean the area where the valve gasket will be placed at the rear of the left cylinder head, as well as the EGR tube. Following this, insert a gasket over the EGR valve and between the valve and cylinder head, then attach the EGR valve to the cylinder head with two bolts, secure both with a torque of 9 Nm (80 in. lbs.). Once you have done that, fit a new gasket to the EGR tube flange and the EGR valve assembly, locate the EGR tube towards the side of the EGR valve and attach the tube's end into the intake manifold using two bolts tightened to 11 Nm (8.5 ft. lbs.). Attach the electrical connector to the top of the EGR valve solenoid, afterward insert the windshield wiper motor and secure the plastic cowl panel. After that, attach the battery's negative cable and run a diagnostic scan to clear any previous DTC downcodes stored by the computer.