How to Remove and Replace Parking Brake Shoes on 2008 Dodge Durango?

Before removing the parking brake shoes, first, condition the system by braking lightly from 25 mph on dry ground with the parking brake pedal. The first step is connecting the rear park brake shoes once more. After that, fit the axleshaft, checking it for correct alignment. Link the park brake cable to the lever that's behind the support plate and loosen or unlock the park brake cable. Replace or adjust the rear brake shoes as often as necessary. Next, set the disc brake rotor and after that, fit the disc brake caliper. After that, install the wheel and tire assembly before finishing the lowered installation.

OEM 2008 Dodge Durango Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Brake Shoe found

View related parts
2008 Dodge Durango Parking Brake Shoes, Rear Part Number: 68001472AB
$47.49 MSRP: $71.60
You Save: $24.11 (34%)
ADD TO CART
Product Specifications
- Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
- Position: Rear
- Replaces: 5080568AC, 5080568AB, 68001472AA
- Item Weight: 4.90 Pounds
- Item Dimensions: 9.9 x 5.4 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68001472AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Dodge Durango Parking Brake Shoe Parts and Q&A

Q: How to Remove and Replace Parking Brake Shoes on 2008 Dodge Durango?
A: Before removing the parking brake shoes, first, condition the system by braking lightly from 25 mph on dry ground with the parking brake pedal. The first step is connecting the rear park brake shoes once more. After that, fit the axleshaft, checking it for correct alignment. Link the park brake cable to the lever that's behind the support plate and loosen or unlock the park brake cable. Replace or adjust the rear brake shoes as often as necessary. Next, set the disc brake rotor and after that, fit the disc brake caliper. After that, install the wheel and tire assembly before finishing the lowered installation.