Other Name: Arm Wiper - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Liftgate Wiper; Arm Rear Wiper
Position: Rear
Item Weight: 0.90 Pounds
Item Dimensions: 1.8 x 3.2 x 14.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5135583AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Other Name: Wiper Arm - Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Wiper
Position: Driver Side
Item Weight: 1.40 Pounds
Item Dimensions: 29.6 x 4.2 x 0.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5135557AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2008 Dodge Durango Wiper Arm Parts and Q&A
Q: How to Maintain a Rear Wiper Arm on 2008 Dodge Durango?
A: To access the rear wiper arm, first insert the thin end of a screwdriver into the notch on the large end of the arm and work it around the outer edge of the plastic cap until it shears off its mounting hole on the pivot portion of the arm. After that, take out the nut that connects the arm to the rear wiper motor shaft. A better method than using a battery terminal puller is to disconnect the wire at the end of the rear wiper arm. After that, gently rock the rear wiper arm to get it free from the output shaft.