How to Remove and Replace the Drive Belt on a 3.7L Engine on 2008 Dodge Nitro?

Before you can change the drive belt on a 3.7L engine, it is best to disconnect the negative battery cable. After that, take out the combination washer reservoir/coolant recovery container. Move the tensioner until it touches the stop and after that, take the belt off. When finished, rotate the tensioner into the freearm position, making sure the tensioner arm does not snap back to prevent major damage to the tensioner.

OEM 2008 Dodge Nitro Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Belts found

View related parts
2008 Dodge Nitro Serpentine Belt Part Number: 53013892AB
$19.35 MSRP: $28.60
You Save: $9.25 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Power Steering; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Power Steering Belt; Belt Power Steering
- Replaces: 53013892AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 17.7 x 4.2 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013892AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Belt - Serpentine Part Number: 53013864AC
$55.46 MSRP: $82.35
You Save: $26.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BELT-SERPENTINE
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013864AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Serpentine Belt Part Number: 53013905AC
$39.15 MSRP: $56.25
You Save: $17.10 (31%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53013905AD, 53013905AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.1 x 3.3 x 15.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013905AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS

2008 Dodge Nitro Drive Belt Parts and Q&A

Q: How to Remove and Replace the Drive Belt on a 3.7L Engine on 2008 Dodge Nitro?
A: Before you can change the drive belt on a 3.7L engine, it is best to disconnect the negative battery cable. After that, take out the combination washer reservoir/coolant recovery container. Move the tensioner until it touches the stop and after that, take the belt off. When finished, rotate the tensioner into the freearm position, making sure the tensioner arm does not snap back to prevent major damage to the tensioner.