How to install a parking brake cable on 2008 Dodge Nitro?

Parking brake cable installation requires the cables to be installed in the axle bracket, then reconnect with the park brake lever and then tighten the bolts to 47 Nm. Install the push cables through the floor, reconnect to the front mount and equalizer and reinstall rear seat. Position the park brake shoes and check functionality.

OEM 2008 Dodge Nitro Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Brake Cables found

View related parts
2008 Dodge Nitro Rear Cable Part Number: 52129231AH
$68.85 MSRP: $105.00
You Save: $36.15 (35%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 52129231AE, 52129231AC, 52129231AD, 52129231AG, 52129231AF
- Item Weight: 2.10 Pounds
- Item Dimensions: 35.0 x 14.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52129231AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Rear Cable Part Number: 52129230AH
$65.84 MSRP: $98.60
You Save: $32.76 (34%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable
- Replaces: 52129230AC, 52129230AG, 52129230AD, 52129230AE
- Item Weight: 2.30 Pounds
- Item Dimensions: 25.0 x 20.8 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52129230AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro Parking Brake Cable Parts and Q&A

Q: How to install a parking brake cable on 2008 Dodge Nitro?
A: Parking brake cable installation requires the cables to be installed in the axle bracket, then reconnect with the park brake lever and then tighten the bolts to 47 Nm. Install the push cables through the floor, reconnect to the front mount and equalizer and reinstall rear seat. Position the park brake shoes and check functionality.