How to Install a Wiper Motor on 2008 Dodge Nitro?

Start by fitting the rubber bezel and grommet into the hole for the mounting bracket on the liftgate if you took them off earlier. After that, place the wiper motor assembly and its bracket together onto the inner panel of the liftgate. Place the mounting bracket over the liftgate and fix it by screwing in the three bolts to a torque of 5.5 Nm (47 in. lbs.). Twist the wire harness connector back in place at the motor and put the inner panel's trim back on. Following that, attach the rear wiper arm back to the output shaft. At the end, connect the battery's negative cable.

OEM 2008 Dodge Nitro Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2008 Dodge Nitro Wiper Motor Part Number: 55157447AA
$102.68 MSRP: $147.00
You Save: $44.32 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor; Motor Rear Window Wiper; Motor Liftgate Wiper
- Item Weight: 4.40 Pounds
- Item Dimensions: 16.8 x 14.1 x 12.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157447AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Nitro Wiper Linkage Part Number: 68020720AD
Product Specifications
- Other Name: Motor - Windshield Wiper; Wiper Motor; Front Motor; Motor And Linkage Windshield Wiper
- Replaces: 68020720AB, 68020720AA
- Item Weight: 4.70 Pounds
- Item Dimensions: 22.1 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020720AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Nitro Wiper Motor Parts and Q&A

Q: How to Install a Wiper Motor on 2008 Dodge Nitro?
A: Start by fitting the rubber bezel and grommet into the hole for the mounting bracket on the liftgate if you took them off earlier. After that, place the wiper motor assembly and its bracket together onto the inner panel of the liftgate. Place the mounting bracket over the liftgate and fix it by screwing in the three bolts to a torque of 5.5 Nm (47 in. lbs.). Twist the wire harness connector back in place at the motor and put the inner panel's trim back on. Following that, attach the rear wiper arm back to the output shaft. At the end, connect the battery's negative cable.