JeepParts
My Garage
My Account
Cart
OEM 2008 Dodge Ram 1500 Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Alternators found
2008 Dodge Ram 1500 Alternator Part Number: 56029700AD
$403.80 MSRP: $608.00You Save: $204.20 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Alternator - Engine; Alternators; Generator Engine
- Item Weight: 13.70 Pounds
- Item Dimensions: 10.8 x 9.9 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029700AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Ram 1500 Alternator Part Number: 56028697AE
Product Specifications- Other Name: Alternator - Engine; Alternators; Generator Engine
- Replaces: 56028697AH
- Item Weight: 14.00 Pounds
- Item Dimensions: 10.3 x 10.2 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028697AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Ram 1500 Alternator Part Number: 56028699AB
Product Specifications- Other Name: Alternator - Engine; Generator Engine
- Item Weight: 15.70 Pounds
- Item Dimensions: 10.7 x 10.0 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028699AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2008 Dodge Ram 1500 Alternator Parts and Q&A
- Q: How to Install an Alternator on 3.7L, 4.7L, and 5.7L Engines on 2008 Dodge Ram 1500?A: Fix the alternator to the engine by placing it correctly and securing it with 2 horizontally placed bolts and one vertical bolt, making sure all are tightened to 40 ft. lbs. (55 Nm). Attach the field wire connector to the back of the generator, join the B+ terminal eyelet to the generator output stud and fasten them together with the mounting nut at 8.8 ft. lbs. (12 Nm). It is important that the serpentine accessory belt is in the proper place to prompt the water pump to move in the correct pattern and not cause the engine to overheat. Attach the generator drive belt and then reconnect the negative battery cable to the battery. With the 5.7L engine, put the generator near the engine and screw the generator in with the 2 provided mounting bolts, tightening them to 30 ft. lbs. (41 Nm). Place the support bracket in front of the generator, bolt it with nuts and tighten them to 41 Newton meters (30 ft. lbs.). Affix the field wire connector to the generator's back and use a 8.8 ft. lb. (12 Nm) screw to tighten the eyelet to the generator's output stud. Before installing and reconnecting the battery cable, double-check that the serpentine accessory drive belt is in the correct place.
Related 2008 Dodge Ram 1500 Parts
2008 Dodge Ram 1500 Alternator Bracket
2008 Dodge Ram 1500 Battery Cable
2008 Dodge Ram 1500 Battery Sensor
2008 Dodge Ram 1500 Battery Tray
2008 Dodge Ram 1500 Car Batteries
2008 Dodge Ram 1500 Starter Motor