How to Maintain and Repair Battery Cables on Gasoline and Diesel Engines on 2008 Dodge Ram 1500?

Before servicing or repairing the battery cables, make sure the ignition switch is positioned to Off and all electrical accessories are off. When removing the negative cable, detach the battery negative terminal clamp (3), then come out the bolt securing the cable to the left front fender, then remove the bolt securing it to the engine and the bolt securing it to the left frame rail. Remove and put aside the battery cable retaining pushpins, fasteners and routing clips until you can disconnect the whole cable. For the positive cable on gasoline engines, take off the battery's positive and negative cable clamps (1) and (3), unfasten the nut (9) that connects the cable to the Totally Integrated Power Module (TIPM) (5) and lastly pull the two TIPM cable connectors (6) and (7) apart. Remove the battery tray pushpin (8) from the battery, raise the vehicle and take out the two pushpins holding the battery cable against the left frame rail. Unscrew the nut (5) attaching the cable to the solenoid (6), lower the vehicle, lift off the terminal cap (4) and remove the nut (3) that secures the cable (1) to the alternator (2). Afterwards, take off any pushpins left on the car and remove the red positive cable from the battery. Similar steps are used for left and right negative power cables in diesel engines; begin by turning the ignition switch off, unclamp the negative cables (clamp no. 1 and 9), remove the bolts and follow the retaining pushpins until the cable comes free. Turn the ignition off, tighten the clamps at the negative terminals and release the bolts at each positive cable connection. After that, trace the retaining pins and screws and remove them until the cables are loose.

OEM 2008 Dodge Ram 1500 Battery Cable

Car Battery Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Battery Cables found

View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 4801488AF
$10.20 MSRP: $58.55
You Save: $48.35 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables
- Replaces: 4801488AE
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801488AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- SLT, ST, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 4801819AC
$6.08 MSRP: $7.70
You Save: $1.62 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables
- Item Weight: 2.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801819AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Ram 1500 Submodels:
- ST, SXT | 6 Cyl 3.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 56051989AA
Product Specifications
- Other Name: Wiring - Battery Negative; Battery Cable; Battery Cables; Ground Strap; Negative Cable; Battery; Wiring Battery Negative
- Item Weight: 7.50 Pounds
- Item Dimensions: 26.3 x 13.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56051989AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 1500 Negative Cable Part Number: 4801640AA
Product Specifications
- Other Name: Wiring - Battery Negative; Battery Cable; Battery Cables; Ground Strap; Wiring Battery Negative
- Item Weight: 7.40 Pounds
- Item Dimensions: 26.3 x 13.4 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801640AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 56051996AE
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables; Wiring Battery Positive
- Item Weight: 7.60 Pounds
- Item Dimensions: 26.3 x 13.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56051996AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT | 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 1500 Negative Cable Part Number: 4801341AD
Product Specifications
- Other Name: Wiring - Battery Negative; Battery Cable; Battery Cables; Ground Strap; Wiring Battery Negative
- Replaces: 4801341AC
- Item Weight: 7.30 Pounds
- Item Dimensions: 26.3 x 13.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801341AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- ST, SXT | 6 Cyl 3.7 L GAS
View related parts
2008 Dodge Ram 1500 Negative Cable Part Number: 56051878AD
Product Specifications
- Other Name: Wiring - Battery Negative; Battery Cable; Battery Cables; Ground Strap
- Replaces: 56051878AB, 56051878AC, 56051878AA
- Item Weight: 7.20 Pounds
- Item Dimensions: 26.3 x 13.3 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56051878AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, TRX4 | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 56051995AE
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cables; Wiring Battery Positive
- Item Weight: 7.60 Pounds
- Item Dimensions: 25.8 x 13.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56051995AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, SXT | 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 4801489AF
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables
- Replaces: 4801489AE
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801489AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- SLT, ST, SXT | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 4801820AC
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables
- Replaces: 4801820AB
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801820AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 56051714AE
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables; Wiring Battery Positive
- Item Weight: 7.50 Pounds
- Item Dimensions: 25.3 x 13.5 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56051714AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT | 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 4801541AD
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables
- Replaces: 4801541AC
- Item Weight: 2.20 Pounds
- Item Dimensions: 14.7 x 15.3 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801541AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- SLT, ST, SXT | 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2008 Dodge Ram 1500 Positive Cable Part Number: 4801534AD
Product Specifications
- Other Name: Wiring - Battery Positive; Battery Cable; Battery Cables
- Replaces: 4801534AC
- Item Weight: 7.20 Pounds
- Item Dimensions: 26.0 x 13.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801534AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 1500 Submodels:
- SLT, ST, SXT | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Ram 1500 Battery Cable Parts and Q&A

Q: How to Maintain and Repair Battery Cables on Gasoline and Diesel Engines on 2008 Dodge Ram 1500?
A: Before servicing or repairing the battery cables, make sure the ignition switch is positioned to Off and all electrical accessories are off. When removing the negative cable, detach the battery negative terminal clamp (3), then come out the bolt securing the cable to the left front fender, then remove the bolt securing it to the engine and the bolt securing it to the left frame rail. Remove and put aside the battery cable retaining pushpins, fasteners and routing clips until you can disconnect the whole cable. For the positive cable on gasoline engines, take off the battery's positive and negative cable clamps (1) and (3), unfasten the nut (9) that connects the cable to the Totally Integrated Power Module (TIPM) (5) and lastly pull the two TIPM cable connectors (6) and (7) apart. Remove the battery tray pushpin (8) from the battery, raise the vehicle and take out the two pushpins holding the battery cable against the left frame rail. Unscrew the nut (5) attaching the cable to the solenoid (6), lower the vehicle, lift off the terminal cap (4) and remove the nut (3) that secures the cable (1) to the alternator (2). Afterwards, take off any pushpins left on the car and remove the red positive cable from the battery. Similar steps are used for left and right negative power cables in diesel engines; begin by turning the ignition switch off, unclamp the negative cables (clamp no. 1 and 9), remove the bolts and follow the retaining pushpins until the cable comes free. Turn the ignition off, tighten the clamps at the negative terminals and release the bolts at each positive cable connection. After that, trace the retaining pins and screws and remove them until the cables are loose.