How to Install a Dimmer Switch on 2008 Dodge Ram 2500?

To install a dimmer switch, disconnect the battery negative cable (thus disable the SRS). Slide the switch into the housing, fasten by screws and reconnect the wire harness. Put the steering column shrouds back on, install the tilt knob, put the steering wheel back on, and then reconnect the battery again.

OEM 2008 Dodge Ram 2500 Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2008 Dodge Ram 2500 Turn Signal Switch Part Number: 56049823AB
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Switch; Air Bag Clockspring.; Multifunction Switch; Switch Housing; Ignition Housing; Clockspring; Switch Multifunction
- Replaces: 56045515AA, 56049823AA, 56045165AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.0 x 5.6 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56049823AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10

2008 Dodge Ram 2500 Dimmer Switch Parts and Q&A

Q: How to Install a Dimmer Switch on 2008 Dodge Ram 2500?
A: To install a dimmer switch, disconnect the battery negative cable (thus disable the SRS). Slide the switch into the housing, fasten by screws and reconnect the wire harness. Put the steering column shrouds back on, install the tilt knob, put the steering wheel back on, and then reconnect the battery again.