How to Replace a Brake Master Cylinder on 2008 Dodge Ram 3500?

It's important to bleed the master cylinder before you install a new master cylinder. Begin by putting the master cylinder (4) onto the studs that hold the booster firmly in place. After that, change the upper mounting nut (2) and tighten it to 25 Nm (221 in. lbs.). Mount the wiring box (3) again and resuspend it using its clips. After that, insert a new lower mounting nut (4) and tighten it to 25 Nm (221 in. lbs.). Next, put the brake lines into place, tighten them to 19 Nm (170 in. lbs.) and attach the connector (1) on the switch for low fluid level. To finish, fill and flush the base brake system.

OEM 2008 Dodge Ram 3500 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Master Cylinders found

View related parts
2008 Dodge Ram 3500 Master Cylinder Part Number: 5093408AA
Product Specifications
- Other Name: Motor Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Brake Reservoir; Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.3 x 6.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093408AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 3500 Master Cylinder Part Number: 5179892AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 3.70 Pounds
- Item Dimensions: 11.9 x 11.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179892AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Ram 3500 Master Cylinder Part Number: 5080888AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 5.70 Pounds
- Item Dimensions: 10.1 x 9.7 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080888AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 10 Cyl 8.0 L GAS, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2008 Dodge Ram 3500 Brake Master Cylinder Parts and Q&A

Q: How to Replace a Brake Master Cylinder on 2008 Dodge Ram 3500?
A: It's important to bleed the master cylinder before you install a new master cylinder. Begin by putting the master cylinder (4) onto the studs that hold the booster firmly in place. After that, change the upper mounting nut (2) and tighten it to 25 Nm (221 in. lbs.). Mount the wiring box (3) again and resuspend it using its clips. After that, insert a new lower mounting nut (4) and tighten it to 25 Nm (221 in. lbs.). Next, put the brake lines into place, tighten them to 19 Nm (170 in. lbs.) and attach the connector (1) on the switch for low fluid level. To finish, fill and flush the base brake system.