How to install a Brake Master Cylinder on 2009 Dodge Ram 3500?

Before placing the brake master cylinder, ensure the output rod from the brake booster is in the correct place and is kept by its retaining ring, then insert it through the master cylinder plunger sleeve. Before fitting, make certain a vacuum seal is present along both the shoulder by the master cylinder flange and the master cylinder neck, so the new part will be properly sealed to the booster. Guide the master cylinder plunger over the output rod of the booster, then slide the master cylinder in place onto the rod before securing it with the flange holes and tailer mounting studs. Gently place the master cylinder around the studs and fit new nuts on, then fasten the nuts with 25 Nm (221 in. lbs.) of torque. Now, install the brake lines tightly at 19 Nm (170 in. lbs.) and reconnect the electrical wire of the low fluid detector. Afterward, fill up and bleed the base brake system.

OEM 2009 Dodge Ram 3500 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Master Cylinders found

View related parts
2009 Dodge Ram 3500 Master Cylinder Part Number: 5093408AA
Product Specifications
- Other Name: Motor Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Brake Reservoir; Master Cylinder Reservoir; Reservoir; Reservoir Brake Master Cylinder
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.3 x 6.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093408AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Master Cylinder Part Number: 5179892AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 3.70 Pounds
- Item Dimensions: 11.9 x 11.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179892AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Master Cylinder Part Number: V1100888AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.7 x 10.1 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: V1100888AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 3500 Master Cylinder Part Number: 5080888AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 5.70 Pounds
- Item Dimensions: 10.1 x 9.7 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5080888AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport | 10 Cyl 8.0 L GAS, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2009 Dodge Ram 3500 Brake Master Cylinder Parts and Q&A

Q: How to install a Brake Master Cylinder on 2009 Dodge Ram 3500?
A: Before placing the brake master cylinder, ensure the output rod from the brake booster is in the correct place and is kept by its retaining ring, then insert it through the master cylinder plunger sleeve. Before fitting, make certain a vacuum seal is present along both the shoulder by the master cylinder flange and the master cylinder neck, so the new part will be properly sealed to the booster. Guide the master cylinder plunger over the output rod of the booster, then slide the master cylinder in place onto the rod before securing it with the flange holes and tailer mounting studs. Gently place the master cylinder around the studs and fit new nuts on, then fasten the nuts with 25 Nm (221 in. lbs.) of torque. Now, install the brake lines tightly at 19 Nm (170 in. lbs.) and reconnect the electrical wire of the low fluid detector. Afterward, fill up and bleed the base brake system.