How to Remove and Replace a Drive Belt on 2008 Dodge Viper?

Before you change the accessory drive belt, the air cleaner housing should be taken off. Afterward, loosen the belt tension by rotating the accessory drive belt tensioner 7 counterclockwise with a 15 mm wrench as you twist on the tensioner pulley bolt. After this, unwind the belt and slide the accessory drive belt tensioner loose at number 7.

OEM 2008 Dodge Viper Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2008 Dodge Viper Serpentine Belt Part Number: 5037862AE
$39.21 MSRP: $58.20
You Save: $18.99 (33%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 5037862AC, 5037862AD, 5037862AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037862AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS, 8.4L V10

2008 Dodge Viper Drive Belt Parts and Q&A

Q: How to Remove and Replace a Drive Belt on 2008 Dodge Viper?
A: Before you change the accessory drive belt, the air cleaner housing should be taken off. Afterward, loosen the belt tension by rotating the accessory drive belt tensioner 7 counterclockwise with a 15 mm wrench as you twist on the tensioner pulley bolt. After this, unwind the belt and slide the accessory drive belt tensioner loose at number 7.