How to Install a Drive Belt for Serpentine Accessories on 2009 Dodge Viper?

As you replace the serpentine belt, put it over each pulley, so its V-grooves fit correctly onto all the pulleys. Align the drive belt over the pulleys on the motor and all the pulleys except the one of the water pump. Rotate the tensioner away from you and place the belt over the water pump pulley, before releasing the tensioner lightly. Lastly, put in the air cleaner housing, using the correct service and repair procedures for the body installation.

OEM 2009 Dodge Viper Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Belt found

View related parts
2009 Dodge Viper Serpentine Belt Part Number: 5037862AE
$39.21 MSRP: $58.20
You Save: $18.99 (33%)
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 5037862AC, 5037862AD, 5037862AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037862AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Viper Submodels:
- ACR, Base, GT, GTC, GTS, SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS, 8.4L V10

2009 Dodge Viper Drive Belt Parts and Q&A

Q: How to Install a Drive Belt for Serpentine Accessories on 2009 Dodge Viper?
A: As you replace the serpentine belt, put it over each pulley, so its V-grooves fit correctly onto all the pulleys. Align the drive belt over the pulleys on the motor and all the pulleys except the one of the water pump. Rotate the tensioner away from you and place the belt over the water pump pulley, before releasing the tensioner lightly. Lastly, put in the air cleaner housing, using the correct service and repair procedures for the body installation.