How to Service and Repair an Automatic Transmission Filter on 2009 Jeep Commander?

Before you start servicing or repairing the fluid filter for the automatic transmission, let the transmission's oil heat up by driving with the engine running. After that, hoist and lift the vehicle off the ground. Take out five bolts and four retainers holding the oil pan to the transmission, then remove the pan plus the gasket. After that, remove the transmission oil filter and o-ring from the controller. Wash the inside of the oil pan and if the gasket appears damaged, replace it. Lift in a new oil filter along with an o-ring into the electrohydraulic control unit and then re-fit the gasket and oil pan to the transmission. Bolt and secure the oil pan and then tighten all the nuts to 8 Nm (70 in.lbs.). Once the car is rested on the ground, add 5.0 L (10.6 pts.) of transmission fluid and check the oil level there.

OEM 2009 Jeep Commander Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Filters found

View related parts
2009 Jeep Commander Oil Filter Part Number: 5015267AD
$51.86 MSRP: $77.10
You Save: $25.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: 4X2 Filter - Transmission Oil; Transmission Filter; Hydraulic Filter; Filter
- Replaces: 5015267AC
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.4 x 5.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Jeep Commander Oil Pan Part Number: 52108325AA
$44.65 MSRP: $60.85
You Save: $16.20 (27%)
ADD TO CART
Product Specifications
- Other Name: Filter - Transmission Oil; Hydraulic Filter, Automatic Transmission; Fluid Kit; Oil Filter; Filter; Filter Transmission Oil
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.3 x 4.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52108325AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Sport | 6 Cyl 3.7 L GAS
View related parts
2009 Jeep Commander Oil Filter Part Number: 5179267AD
$37.41 MSRP: $54.00
You Save: $16.59 (31%)
ADD TO CART
Product Specifications
- Other Name: Filter Package - Transmission Oil; Transmission Filter; Transmission Filter Kit; Hydraulic Filter; Filter; Filter Package Transmission Oil
- Replaces: 5179267AC, 4799662AB, 5179267AA, 5179267AB, 4799662AC, 4799662
- Item Weight: 1.50 Pounds
- Item Dimensions: 3.2 x 3.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2009 Jeep Commander Automatic Transmission Filter Parts and Q&A

Q: How to Service and Repair an Automatic Transmission Filter on 2009 Jeep Commander?
A: Before you start servicing or repairing the fluid filter for the automatic transmission, let the transmission's oil heat up by driving with the engine running. After that, hoist and lift the vehicle off the ground. Take out five bolts and four retainers holding the oil pan to the transmission, then remove the pan plus the gasket. After that, remove the transmission oil filter and o-ring from the controller. Wash the inside of the oil pan and if the gasket appears damaged, replace it. Lift in a new oil filter along with an o-ring into the electrohydraulic control unit and then re-fit the gasket and oil pan to the transmission. Bolt and secure the oil pan and then tighten all the nuts to 8 Nm (70 in.lbs.). Once the car is rested on the ground, add 5.0 L (10.6 pts.) of transmission fluid and check the oil level there.