How to Install a Front Steering Knuckle on 2008 Jeep Commander?

To fit the front steering knuckle, screw it on the vehicle followed by tightening the lower and upper ball joints by using their respective nuts all tightened to 95 Nm. Fit the hub/bearing (115 Nm) and axle shaft nut (135 Nm 4WD). Complete with installing the wheel speed sensor, brake components and wheel alignment.

OEM 2008 Jeep Commander Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2008 Jeep Commander Knuckle, Front Passenger Side Part Number: 52090180AD
$482.89 MSRP: $731.00
You Save: $248.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 52090180AC
- Item Weight: 12.60 Pounds
- Item Dimensions: 24.1 x 11.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52090180AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Jeep Commander Knuckle, Front Driver Side Part Number: 52090179AD
$336.90 MSRP: $755.00
You Save: $418.10 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 52090179AC
- Item Weight: 13.20 Pounds
- Item Dimensions: 25.3 x 11.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52090179AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Jeep Commander Steering Knuckle Parts and Q&A

Q: How to Install a Front Steering Knuckle on 2008 Jeep Commander?
A: To fit the front steering knuckle, screw it on the vehicle followed by tightening the lower and upper ball joints by using their respective nuts all tightened to 95 Nm. Fit the hub/bearing (115 Nm) and axle shaft nut (135 Nm 4WD). Complete with installing the wheel speed sensor, brake components and wheel alignment.