What Are the Steps Involved in Installing a Crankshaft on 2008 Jeep Compass?

Five principal bearings support the crankshaft, and the upper shells have oil grooves. Bolt holes must be clean, upper bearings must be installed, and crankshaft balanced (unless machined). Install crankshaft torque, tighten main bolts in given sequence, and install connecting rod bearings. Full assembly, including oil filter, coolant and engine cover.

OEM 2008 Jeep Compass Crankshaft

Crank Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshafts found

View related parts
2008 Jeep Compass Crankshaft Part Number: 68001693AC
Product Specifications
- Other Name: Crankshaft - Engine; Crankshaft Package Engine; Crankshaft Kit Engine
- Replaces: 4884561AC, 68001693AA
- Item Weight: 42.70 Pounds
- Item Dimensions: 22.3 x 8.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68001693AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Compass Submodels:
- Base, Latitude, Sport | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
2008 Jeep Compass Crankshaft Part Number: 68001694AC
Product Specifications
- Other Name: Crankshaft - Engine; Crankshaft Kit Engine See Note; Crankshaft Package Engine; Crankshaft Kit Engine
- Replaces: 68001694AA, 4884563AC
- Item Weight: 44.60 Pounds
- Item Dimensions: 21.9 x 8.4 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68001694AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Compass Submodels:
- Altitude, Base, High Altitude, Latitude, Limited, Sport | 2.4L L4, 4 Cyl 2.4 L GAS

2008 Jeep Compass Crankshaft Parts and Q&A

Q: What Are the Steps Involved in Installing a Crankshaft on 2008 Jeep Compass?
A: Five principal bearings support the crankshaft, and the upper shells have oil grooves. Bolt holes must be clean, upper bearings must be installed, and crankshaft balanced (unless machined). Install crankshaft torque, tighten main bolts in given sequence, and install connecting rod bearings. Full assembly, including oil filter, coolant and engine cover.