How to Effectively Remove and Replace a Brake Caliper on 2008 Jeep Liberty?

Make sure the brake pads are installed before you take off and replace the caliper. Then, set the caliper in place and tighten its bolts to 37 Nm (28 ft. lbs.), making sure the brake hose isn't twisted or bent until you tighten the final bolt. Set the seal washers around the brake hose connector and then tighten the brake hose banjo bolt to 31 Nm (23 ft. lbs.). Removing the prop rod from the car should be followed by bleeding the base part of the brake system. Set up the tire and wheel assemblies and, once the supports are removed, let the vehicle drop to the ground. Once you're done, step on the brake pedal to test how firm it is before you drive away.

OEM 2008 Jeep Liberty Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Calipers found

View related parts
2008 Jeep Liberty Caliper, Rear Driver Side Part Number: 68003778AA
$314.26 MSRP: $464.00
You Save: $149.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.80 Pounds
- Item Dimensions: 3.4 x 6.4 x 8.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003778AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Caliper, Front Driver Side Part Number: 68003707AC
$297.27 MSRP: $438.00
You Save: $140.73 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Driver Side
- Replaces: 68003707AA, R8003707AC
- Item Weight: 7.50 Pounds
- Item Dimensions: 5.8 x 7.9 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003707AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Caliper, Front Passenger Side Part Number: 68003697AC
$297.27 MSRP: $438.00
You Save: $140.73 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Front Left, Front Right; Caliper Assembly Disc Brake Front; Brake Caliper
- Position: Front Passenger Side
- Replaces: R8003697AC, 68003697AA
- Item Weight: 7.90 Pounds
- Item Dimensions: 5.0 x 8.0 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003697AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Caliper, Rear Driver Side Part Number: 68003774AA
$314.26 MSRP: $464.00
You Save: $149.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper - Disc Brake; Disc Brake Caliper, Rear Left, Rear Right; Caliper Assembly Disc Brake Rear; Brake Caliper
- Position: Rear Driver Side
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.3 x 16.1 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003774AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2008 Jeep Liberty Brake Caliper Parts and Q&A

Q: How to Effectively Remove and Replace a Brake Caliper on 2008 Jeep Liberty?
A: Make sure the brake pads are installed before you take off and replace the caliper. Then, set the caliper in place and tighten its bolts to 37 Nm (28 ft. lbs.), making sure the brake hose isn't twisted or bent until you tighten the final bolt. Set the seal washers around the brake hose connector and then tighten the brake hose banjo bolt to 31 Nm (23 ft. lbs.). Removing the prop rod from the car should be followed by bleeding the base part of the brake system. Set up the tire and wheel assemblies and, once the supports are removed, let the vehicle drop to the ground. Once you're done, step on the brake pedal to test how firm it is before you drive away.