How to Install and Reprogram an ABS Control Module on 2008 Jeep Liberty?

Before installing the EBCM, if changing the ABM module, use a scan tool to make sure it is reprogrammed. The first step is to add the ABM module to the HCU unit. After that, use the provided mounting screws and tighten them to 2 Nm (16 in. lbs.). Push the release on the harness connector until it snaps into the HCU unit. Please reattach the negative battery cable to where it belongs on the battery.

OEM 2008 Jeep Liberty ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2008 Jeep Liberty Control Module Part Number: 68025876AC
Product Specifications
- Other Name: Module - Anti-Lock Brake System; ABS Control Module
- Replaces: 68025876AB, 68025876AA
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.3 x 6.0 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68025876AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Modulator Part Number: 68025875AC
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module
- Replaces: 68025875AA
- Item Weight: 6.40 Pounds
- Item Dimensions: 10.1 x 7.7 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68025875AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

2008 Jeep Liberty ABS Control Module Parts and Q&A

Q: How to Install and Reprogram an ABS Control Module on 2008 Jeep Liberty?
A: Before installing the EBCM, if changing the ABM module, use a scan tool to make sure it is reprogrammed. The first step is to add the ABM module to the HCU unit. After that, use the provided mounting screws and tighten them to 2 Nm (16 in. lbs.). Push the release on the harness connector until it snaps into the HCU unit. Please reattach the negative battery cable to where it belongs on the battery.