How to Remove a Front Steering Knuckle on 2008 Jeep Liberty?

To take off the front steering knuckle, lift the car and take the tire off. Remove the caliper adapter, rotor, and wheel speed sensor. For four-wheels drive, take off the axle shaft nut. Separate the outer tie rod, lower ball joint and upper ball joint from the knuckle. Inspect for damage and then remove the knuckle.

OEM 2008 Jeep Liberty Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2008 Jeep Liberty Knuckle, Front Passenger Side Part Number: 52125012AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 10.60 Pounds
- Item Dimensions: 18.2 x 12.2 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125012AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Knuckle, Front Driver Side Part Number: 52125013AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 8.80 Pounds
- Item Dimensions: 17.7 x 11.4 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125013AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS

2008 Jeep Liberty Steering Knuckle Parts and Q&A

Q: How to Remove a Front Steering Knuckle on 2008 Jeep Liberty?
A: To take off the front steering knuckle, lift the car and take the tire off. Remove the caliper adapter, rotor, and wheel speed sensor. For four-wheels drive, take off the axle shaft nut. Separate the outer tie rod, lower ball joint and upper ball joint from the knuckle. Inspect for damage and then remove the knuckle.