How to Properly Install a Rear Shock Absorber on 2008 Jeep Liberty?

First, fit the shock absorber (2) into the frame bracket and tighten it with bolt (1). You should then secure the shock absorber (2) to the axle bracket (3) by inserting the proper bolt through them. With the car loaded up, tighten the upper bolt/nut to 108 Nm (80 ft. lbs.) and the lower bolt/nut to 115 Nm (85 ft. lbs.) correctly. After that, take off the supports and bring the vehicle down to give it a good wash.

OEM 2008 Jeep Liberty Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shock Absorbers found

View related parts
2008 Jeep Liberty Shock Absorber, Front Part Number: 68031298AC
$126.90 MSRP: $190.00
You Save: $63.10 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber - Suspension; Front Suspension Strut and Shock Assembly Kit; Shock Absorber Kit; Complete Strut.; Strut; Shock Absorber Package Suspension Front
- Position: Front
- Replaces: 68031298AA, 68031298AD, 68031298AB
- Item Weight: 6.40 Pounds
- Item Dimensions: 17.7 x 8.4 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68031298AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
2008 Jeep Liberty Shock Absorber, Rear Part Number: 52125094AC
Product Specifications
- Other Name: Absorber - Suspension; Shock Absorber, Rear;Strut/Coil Kit;ABS;Complete Strut; Shock; Shock Absorber Suspension Rear
- Position: Rear
- Replaces: 52125094AA, 52125094AB
- Item Weight: 6.40 Pounds
- Item Dimensions: 21.9 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52125094AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Jeep Liberty Submodels:
- Limited, Sport | 6 Cyl 3.7 L GAS

2008 Jeep Liberty Shock Absorber Parts and Q&A

Q: How to Properly Install a Rear Shock Absorber on 2008 Jeep Liberty?
A: First, fit the shock absorber (2) into the frame bracket and tighten it with bolt (1). You should then secure the shock absorber (2) to the axle bracket (3) by inserting the proper bolt through them. With the car loaded up, tighten the upper bolt/nut to 108 Nm (80 ft. lbs.) and the lower bolt/nut to 115 Nm (85 ft. lbs.) correctly. After that, take off the supports and bring the vehicle down to give it a good wash.