How to Service and Repair a Steering Knuckle on 2007 Jeep Liberty?

Before starting on the steering knuckle, raise and support the vehicle and then take off the tire and wheel assembly. After that, remove the caliper adapter and make sure the brake caliper is correctly supported so the brake hose is protected. When that's done, you should remove the disc brake rotor and the wheel speed sensor. When the unit is equipped with four-wheel drive, first pry off the nut on the axle shaft, then take out the hub/bearing. After that, separate the outer tie rod end from the steering knuckle and then use tool C-4150A to unfasten the lower ball joint from the suspension arm after removing the lower ball joint nut. After that, take out the upper ball joint nut and break the joint from the knuckle using tool C-4150A. Now, drive the knuckle out of the car.

OEM 2007 Jeep Liberty Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2007 Jeep Liberty Knuckle, Front Passenger Side Part Number: 52088652AE
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 52088652AC, 52088652AD
- Item Weight: 13.70 Pounds
- Item Dimensions: 14.1 x 11.2 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088652AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Liberty Knuckle, Front Driver Side Part Number: 52088653AE
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left
- Position: Front Driver Side
- Replaces: 52088653AD, 52088653AC
- Item Weight: 13.40 Pounds
- Item Dimensions: 14.3 x 11.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088653AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2007 Jeep Liberty Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on 2007 Jeep Liberty?
A: Before starting on the steering knuckle, raise and support the vehicle and then take off the tire and wheel assembly. After that, remove the caliper adapter and make sure the brake caliper is correctly supported so the brake hose is protected. When that's done, you should remove the disc brake rotor and the wheel speed sensor. When the unit is equipped with four-wheel drive, first pry off the nut on the axle shaft, then take out the hub/bearing. After that, separate the outer tie rod end from the steering knuckle and then use tool C-4150A to unfasten the lower ball joint from the suspension arm after removing the lower ball joint nut. After that, take out the upper ball joint nut and break the joint from the knuckle using tool C-4150A. Now, drive the knuckle out of the car.