OEM 2008 Jeep Wrangler Cruise Control Switch

2008 Jeep Wrangler Cruise Control Switch Parts and Q&A

• Q: How to Install a Cruise Control Switch on 2008 Jeep Wrangler?

  A: First, you should attach the electrical connector to the speed control switch to install the cruise control switch. Secure the speed control switch with the proper screws, confirm that the rubber seal is placed around it and tighten each screw to 1.6 Nm (15 in. lbs.). After that, insert the horn switch and make it secure with three mounting screws. After the electrical connector is linked to the Clock Spring, you should attach the driver air bag. Make sure not to attach the battery negative cable at this moment; first, do the air bag system test. When the test is over, fix the battery and close the hood. Check that the car and the new system are all functioning correctly in the end.