How to Remove the Front Upper Control Arm on 2009 Chrysler 300?

If the left upper control arm is what you are removing, take a moment to rearrange the coolant recovery container first. To remove the right upper control arm, disassemble the IPM from its place and move it to a new position. Remove the shock tower cover from the top of the shock tower if you have one. Take out the three shocks nuts and then unscrew the nuts from the upper control arms. Lift up the car and take off the bolts in the wheel mounting nuts, along with the tire and wheel assembly. Open the routing clip at the brake tube bracket where the wheel speed sensor cable is attached. Relax the nut screwed to the upper ball joint stud until it is even with the stud's tip, to prevent the knuckle from being bent during use of Special Tool 9360. Slide the Puller into position next to the ball joint seal boot on the knuckle and set it so the stud will separate from the joint. Pull the shock assembly down as you remove the nut from the top ball joint stud until the ball studs clear the shock tower and you can reach the upper control arm mounting screws. If your upper control arm is the faulty one, remove the link between the headlamp leveling sensor and the upper control arm. After that, take out the upper control arm mount bolts and remove the upper control arm from the shock tower.

OEM 2009 Chrysler 300 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Control Arms found

View related parts
2009 Chrysler 300 Lower Control Arm, Front Upper Driver Side Part Number: 4895669AB
$417.93 MSRP: $615.00
You Save: $197.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Left Suspension Control Arm and Ball Joint Assembly.; Upper Control Arm; Arm Upper Control Front; Suspension Control Arm; Control Arm
- Position: Front Upper Driver Side
- Replaces: 5180597AA, 5180597AB, 5180597AC, 4895669AA
- Item Weight: 5.80 Pounds
- Item Dimensions: 12.4 x 9.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4895669AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Chrysler 300 Lower Control Arm, Front Upper Passenger Side Part Number: 4895668AB
$417.93 MSRP: $615.00
You Save: $197.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Right Suspension Control Arm and Ball Joint Assembly.; Upper Control Arm; Arm Upper Control Front; Suspension Control Arm; Control Arm
- Position: Front Upper Passenger Side
- Replaces: 5180596AB, 4895668AA, 5180596AC
- Item Weight: 5.80 Pounds
- Item Dimensions: 12.4 x 12.9 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4895668AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Chrysler 300 Lower Control Arm, Front Part Number: 68002123AC
$220.94 MSRP: $329.00
You Save: $108.06 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Front Lower Rearward; Suspension Control Arm Bushing; Upper Control Arm; Arm Lower Control Front Lower; Arm Lower Control Front; Suspension Control Arm; Control Arm
- Position: Front Lower
- Replaces: 68002123AA, 68002123AB
- Item Weight: 6.40 Pounds
- Item Dimensions: 3.1 x 4.1 x 16.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 68002123AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Upper Control Arm, Front Driver Side Part Number: 68045131AB
$260.59 MSRP: $388.00
You Save: $127.41 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Left Suspension Control Arm and Ball Joint Assembly.
- Position: Front Upper Driver Side
- Replaces: 68045131AA
- Item Weight: 5.90 Pounds
- Item Dimensions: 12.8 x 11.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68045131AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Upper Control Arm, Front Passenger Side Part Number: 68045130AB
$261.72 MSRP: $390.00
You Save: $128.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Right Upper Suspension Control Arm and Ball Joint Assembly.
- Position: Front Upper Passenger Side
- Replaces: 68045130AA
- Item Weight: 5.50 Pounds
- Item Dimensions: 12.9 x 11.7 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68045130AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Lower Control Arm, Front Driver Side Part Number: 4895041AF
$438.69 MSRP: $667.00
You Save: $228.31 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Left Suspension Control Arm and Ball Joint Assembly.
- Position: Front Lower Driver Side
- Replaces: 4895041AC
- Item Weight: 16.50 Pounds
- Item Dimensions: 18.2 x 15.6 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4895041AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, Signature Series, Touring | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Upper Control Arm, Front Passenger Side Part Number: 4782666AF
$243.60 MSRP: $361.00
You Save: $117.40 (33%)
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Right Upper Suspension Control Arm and Ball Joint Assembly.
- Position: Front Upper Passenger Side
- Replaces: 4782666AC, 4782666AE
- Item Weight: 6.10 Pounds
- Item Dimensions: 2.7 x 12.4 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782666AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Upper Control Arm, Front Driver Side Part Number: 4782665AF
$237.58 MSRP: $361.00
You Save: $123.42 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Left Upper Suspension Control Arm and Ball Joint Assembly.
- Position: Front Upper Driver Side
- Replaces: 4782665AE, 4782665AC
- Item Weight: 6.00 Pounds
- Item Dimensions: 3.1 x 11.8 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782665AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Lower Control Arm, Front Passenger Side Part Number: 4895040AF
Product Specifications
- Other Name: Arm - Lower Control; Front Right Suspension Control Arm and Ball Joint Assembly.
- Position: Front Lower Passenger Side
- Replaces: 4895040AC
- Item Weight: 17.90 Pounds
- Item Dimensions: 6.7 x 16.0 x 18.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4895040AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, Signature Series, Touring | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Chrysler 300 Control Arm Parts and Q&A

Q: How to Remove the Front Upper Control Arm on 2009 Chrysler 300?
A: If the left upper control arm is what you are removing, take a moment to rearrange the coolant recovery container first. To remove the right upper control arm, disassemble the IPM from its place and move it to a new position. Remove the shock tower cover from the top of the shock tower if you have one. Take out the three shocks nuts and then unscrew the nuts from the upper control arms. Lift up the car and take off the bolts in the wheel mounting nuts, along with the tire and wheel assembly. Open the routing clip at the brake tube bracket where the wheel speed sensor cable is attached. Relax the nut screwed to the upper ball joint stud until it is even with the stud's tip, to prevent the knuckle from being bent during use of Special Tool 9360. Slide the Puller into position next to the ball joint seal boot on the knuckle and set it so the stud will separate from the joint. Pull the shock assembly down as you remove the nut from the top ball joint stud until the ball studs clear the shock tower and you can reach the upper control arm mounting screws. If your upper control arm is the faulty one, remove the link between the headlamp leveling sensor and the upper control arm. After that, take out the upper control arm mount bolts and remove the upper control arm from the shock tower.