How to Use Ball Joint Press C-4212F to Disassemble a Steering Knuckle on 2009 Chrysler 300?

It would be best to attach Ball Joint Press C-4212F into a vise while taking the steering knuckle apart. First, slip Ball Joint Remover/Installer 9320 into Ball Joint Press C-4212F's cup and screw it in place. Then, join Ball Joint Remover/Installer 9320-3 onto the tip of the screw-drive part of your Ball Joint Press C-4212F. Remove the snap-ring at the bottom of the ball joint with snap-ring pliers. Slide the halves of Support Clamp onto the ball joint and around the knuckle. From beneath, use the screw to secure them in place. Hold the press screw-driver on top of the ball with the knuckle, guiding the top of the ball joint into the Receiver as you tighten, so it contacts the Remover underneath. After installing the Support Clamp, make sure the Receiver rests in its recessed section. Using the Press screw-driver, push the ball joint out of the knuckle and into the Receiver. Subsequently, take out the screw-drive, pull the knuckle off the Press, remove the ball joint from the Receiver and extract the Support Clamp from the knuckle.

OEM 2009 Chrysler 300 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Steering Knuckles found

View related parts
2009 Chrysler 300 Knuckle, Rear Driver Side Part Number: 4782587AF
$666.31 MSRP: $943.00
You Save: $276.69 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Left
- Position: Rear Driver Side
- Replaces: 4782587AD, 4782587AC
- Item Weight: 5.90 Pounds
- Item Dimensions: 13.4 x 9.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782587AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Knuckle, Rear Passenger Side Part Number: 4782586AF
$609.96 MSRP: $924.00
You Save: $314.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Right
- Position: Rear Passenger Side
- Replaces: 4782586AD, 4782586AC
- Item Weight: 5.00 Pounds
- Item Dimensions: 13.4 x 9.8 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782586AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Knuckle, Front Driver Side Part Number: 4782741AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left
- Position: Front Driver Side
- Replaces: 4782741AC, 4782741AB
- Item Weight: 16.70 Pounds
- Item Dimensions: 8.0 x 9.2 x 21.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782741AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Knuckle, Front Driver Side Part Number: 4895711AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Replaces: 4895711AA
- Item Weight: 20.70 Pounds
- Item Dimensions: 24.7 x 9.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4895711AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Knuckle, Front Passenger Side Part Number: 4895710AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Replaces: 4895710AA
- Item Weight: 20.70 Pounds
- Item Dimensions: 24.9 x 9.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4895710AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Knuckle, Rear Passenger Side Part Number: 4782928AF
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Right
- Position: Rear Passenger Side
- Replaces: 4782928AC, 4782928AD, 68258460AA
- Item Weight: 6.10 Pounds
- Item Dimensions: 14.1 x 10.9 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782928AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, Limited, Signature Series, Touring | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler 300 Knuckle, Rear Driver Side Part Number: 4782929AF
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Left
- Position: Rear Driver Side
- Replaces: 4782929AD, 4782929AC
- Item Weight: 6.40 Pounds
- Item Dimensions: 14.5 x 10.8 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782929AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, Limited, Signature Series, Touring | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler 300 Knuckle, Rear Passenger Side Part Number: 68248386AA
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Right
- Position: Rear Passenger Side
- Replaces: 4854458AB, 4854458AA, 4854458AC, 4854458AD
- Item Weight: 13.80 Pounds
- Item Dimensions: 13.2 x 12.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68248386AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Knuckle, Rear Driver Side Part Number: 68248387AA
Product Specifications
- Other Name: Knuckle - Rear; Suspension Knuckle, Rear Left
- Position: Rear Driver Side
- Replaces: 4854459AD, 4854459AC, 4854459AB, 4854459AA
- Item Weight: 5.60 Pounds
- Item Dimensions: 12.8 x 12.5 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68248387AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2009 Chrysler 300 Knuckle, Front Passenger Side Part Number: 4782740AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 4782740AB, 4782740AC, 4782740AA
- Item Weight: 18.10 Pounds
- Item Dimensions: 20.9 x 8.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4782740AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2009 Chrysler 300 Steering Knuckle Parts and Q&A

Q: How to Use Ball Joint Press C-4212F to Disassemble a Steering Knuckle on 2009 Chrysler 300?
A: It would be best to attach Ball Joint Press C-4212F into a vise while taking the steering knuckle apart. First, slip Ball Joint Remover/Installer 9320 into Ball Joint Press C-4212F's cup and screw it in place. Then, join Ball Joint Remover/Installer 9320-3 onto the tip of the screw-drive part of your Ball Joint Press C-4212F. Remove the snap-ring at the bottom of the ball joint with snap-ring pliers. Slide the halves of Support Clamp onto the ball joint and around the knuckle. From beneath, use the screw to secure them in place. Hold the press screw-driver on top of the ball with the knuckle, guiding the top of the ball joint into the Receiver as you tighten, so it contacts the Remover underneath. After installing the Support Clamp, make sure the Receiver rests in its recessed section. Using the Press screw-driver, push the ball joint out of the knuckle and into the Receiver. Subsequently, take out the screw-drive, pull the knuckle off the Press, remove the ball joint from the Receiver and extract the Support Clamp from the knuckle.