How to Safely Install an Air Bag While Following Proper Procedures on 2009 Chrysler Aspen?

Before installing the driver air bag, turn off the Supplemental Restraint System by disconnecting the negative battery cable, letting the system capacitor discharge for two minutes and then covering the cable with tape. For those systems, you must ensure that the service disconnect is unplugged from the high voltage battery pack. Prevent anything except air bag material from getting into the driver air bag cushion or lying between the cushion and the air bag trim cover and never paint the trim cover because it could affect deployment. If the air bag is not working properly and is still in the unit, use the procedures given for non-deployed extra safety belts. If you do deploy, look over the service procedures for taking out the panel afterward. Bring the driver air bag up against the steering wheel to make sure the three connections on the back of the air bag assembly are linked. Definitely push both air bag wire connections into their inflator connector receptacles until there is an audible sound. Relink the wiring for the steering wheel horn switch to the wire connector for the horn switch feed from the passenger air bag housing on the other side of the steering wheel. Install the driver air bag into the steering wheel, paying attention to make sure you do not press the wires or harness together. Turn the steering wheel to face you and insert the two screws by the underside from the outside. Tighten them to 10 Nm (90 in. lbs.). Don't connect the negative battery cable or HEV service disconnect now and test the SRS after each SRS repair or service procedure.

OEM 2009 Chrysler Aspen Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Air Bags found

View related parts
2009 Chrysler Aspen Driver Inflator Module, Light Gray, Driver Side Part Number: 1BQ03BD1AD
$125.96 MSRP: $824.00
You Save: $698.04 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Driver; Steering Wheel Air Bag; Driver Air Bag
- Position: Driver Side
- Replaces: 1BQ03BD1AC
- Item Weight: 4.40 Pounds
- Item Dimensions: 13.9 x 10.9 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1BQ03BD1AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Driver Air Bag, Slate Gray, Driver Side Part Number: 1BQ03XDBAD
$617.16 MSRP: $899.00
You Save: $281.84 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Driver; Steering Wheel Air Bag
- Position: Driver Side
- Replaces: 1BQ03XDBAC
- Item Weight: 4.50 Pounds
- Item Dimensions: 13.6 x 11.2 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1BQ03XDBAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Inflator Curtain, Driver Side Part Number: 52029345AG
$875.93 MSRP: $1280.00
You Save: $404.07 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbagg - Side Curtain; Curtain Air Bag, Left; Head Air Bag
- Position: Driver Side
- Replaces: 52029345AC, 55361137AE, 52029345AF, 52029345AD, 52029345AE
- Item Weight: 16.10 Pounds
- Item Dimensions: 82.8 x 9.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52029345AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Passenger Air Bag, Light Gray, Passenger Side Part Number: 1EM89ZJ8AD
$2066.73 MSRP: $3010.00
You Save: $943.27 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Passenger
- Position: Passenger Side
- Replaces: 1EM89ZJ8AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EM89ZJ8AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Passenger Air Bag, Slate Gray, Upper Passenger Side Part Number: 1EM89XDHAD
$2272.83 MSRP: $3310.00
You Save: $1037.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Airbag - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Position: Upper Passenger Side
- Replaces: 1EM89XDHAB, 1EM89XDHAC, 1EM89XDHAA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1EM89XDHAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Inflator Curtain, Passenger Side Part Number: 52029344AG
Product Specifications
- Other Name: Airbagg - Side Curtain; Curtain Air Bag, Right; Head Air Bag
- Position: Passenger Side
- Replaces: 52029344AC, 52029344AE, 52029344AF, 52029344AD, 55361138AD
- Item Weight: 15.50 Pounds
- Item Dimensions: 90.9 x 9.3 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52029344AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Air Bag Parts and Q&A

Q: How to Safely Install an Air Bag While Following Proper Procedures on 2009 Chrysler Aspen?
A: Before installing the driver air bag, turn off the Supplemental Restraint System by disconnecting the negative battery cable, letting the system capacitor discharge for two minutes and then covering the cable with tape. For those systems, you must ensure that the service disconnect is unplugged from the high voltage battery pack. Prevent anything except air bag material from getting into the driver air bag cushion or lying between the cushion and the air bag trim cover and never paint the trim cover because it could affect deployment. If the air bag is not working properly and is still in the unit, use the procedures given for non-deployed extra safety belts. If you do deploy, look over the service procedures for taking out the panel afterward. Bring the driver air bag up against the steering wheel to make sure the three connections on the back of the air bag assembly are linked. Definitely push both air bag wire connections into their inflator connector receptacles until there is an audible sound. Relink the wiring for the steering wheel horn switch to the wire connector for the horn switch feed from the passenger air bag housing on the other side of the steering wheel. Install the driver air bag into the steering wheel, paying attention to make sure you do not press the wires or harness together. Turn the steering wheel to face you and insert the two screws by the underside from the outside. Tighten them to 10 Nm (90 in. lbs.). Don't connect the negative battery cable or HEV service disconnect now and test the SRS after each SRS repair or service procedure.