How to Safely Service a Brake Light Switch on 2009 Chrysler Aspen?

To service the brake light switch, disable the SRS by disconnecting the negative battery cable and waiting two minutes. For HEV systems, a technician must remove the high voltage service disconnect. Disconnect the wire harness, rotate the switch, and pull it out. Replace the one-time self-adjusting switch if removed.

OEM 2009 Chrysler Aspen Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Light Switches found

View related parts
2009 Chrysler Aspen Parking Brake Switch, Black Part Number: 4221463
$18.50 MSRP: $27.20
You Save: $8.70 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Parking Brake; Electronic Parking Brake Control Switch; Parking Brake Warning Switch; Seat Adjuster, W/Bezel, Black Buttons, Woodgrain, W/Memory Opening.
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.5 x 1.6 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4221463
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Switch Package - Stop Lamp Part Number: 5083344AB
Product Specifications
- Other Name: SW PKG-STOP LAMP
- SKU: 5083344AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Brake Light Switch Parts and Q&A

Q: How to Safely Service a Brake Light Switch on 2009 Chrysler Aspen?
A: To service the brake light switch, disable the SRS by disconnecting the negative battery cable and waiting two minutes. For HEV systems, a technician must remove the high voltage service disconnect. Disconnect the wire harness, rotate the switch, and pull it out. Replace the one-time self-adjusting switch if removed.