How to Maintain and Fix a Parking Brake Cable on 2009 Chrysler Sebring?

Begin by unhooking and removing the negative battery cable to deal with or mend the parking brake cable. Block the tire and wheel set after releasing the parking brake lever so the vehicle won't move. Take out the center console and pull down the parking brake lever. Badge with parking brake Off or if required may need to consult manual for model matching procedure. Lift up the rear seat cushion, then pull the carpeting at the back and fold it forward so you can see the parking brake cables under the rear floor. With a 1/2 inch (13 mm) wrench, collapse one parking brake cable's retainer and pull the entire housing straight away from its bracket. Lift the car, loose the mounting nuts for the rear wheels and then unmount the tire and wheel. After removing the parking brake shoes, pull out the hair pin pinning the parking brake cable to the brake support plate. Pull the parking brake cable out from both the support plate and trailing link hole, then remove the screw and nut jointing the clamp to the body. After that, use the sealing grommet to remove the parking brake cable as it passes through the hole in the floor pan.

OEM 2009 Chrysler Sebring Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Parking Brake Cables found

View related parts
2009 Chrysler Sebring Cable Part Number: 5085747AH
$48.85 MSRP: $71.70
You Save: $22.85 (32%)
ADD TO CART
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5085747AG, 5085747AD, 5085747AE, 5085747AF
- Item Weight: 1.70 Pounds
- Item Dimensions: 68.7 x 1.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085747AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Cable Part Number: 5085745AE
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5085745AD
- Item Weight: 1.60 Pounds
- Item Dimensions: 16.0 x 16.1 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085745AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Cable Part Number: 5085744AE
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5085744AD
- Item Weight: 1.90 Pounds
- Item Dimensions: 18.7 x 13.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085744AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Chrysler Sebring Cable Part Number: 5085746AG
Product Specifications
- Other Name: Cable - Parking Brake; Brake Cable; Cable Parking Brake
- Replaces: 5085746AD, 5085746AE, 5085746AF
- Item Weight: 1.70 Pounds
- Item Dimensions: 72.1 x 1.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5085746AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Chrysler Sebring Parking Brake Cable Parts and Q&A

Q: How to Maintain and Fix a Parking Brake Cable on 2009 Chrysler Sebring?
A: Begin by unhooking and removing the negative battery cable to deal with or mend the parking brake cable. Block the tire and wheel set after releasing the parking brake lever so the vehicle won't move. Take out the center console and pull down the parking brake lever. Badge with parking brake Off or if required may need to consult manual for model matching procedure. Lift up the rear seat cushion, then pull the carpeting at the back and fold it forward so you can see the parking brake cables under the rear floor. With a 1/2 inch (13 mm) wrench, collapse one parking brake cable's retainer and pull the entire housing straight away from its bracket. Lift the car, loose the mounting nuts for the rear wheels and then unmount the tire and wheel. After removing the parking brake shoes, pull out the hair pin pinning the parking brake cable to the brake support plate. Pull the parking brake cable out from both the support plate and trailing link hole, then remove the screw and nut jointing the clamp to the body. After that, use the sealing grommet to remove the parking brake cable as it passes through the hole in the floor pan.