How to Service a Clutch Slave Cylinder on 2009 Dodge Caliber?

When servicing the Clutch Slave Cylinder, make sure brake fluid is added to the max line and the cap is tight on the reservoir to protect the Clutch Master from draining out during removal. To start, take out the transaxle from the car. After that, release the hydraulic line (6) connected to the bleeder assembly (2) and next detach the bleeder assembly (2) from the master cylinder (3). At last, take away the slave cylinder-to-clutch bellhousing bolts (4) and free the slave cylinder (3) from the inside of the transaxle.

OEM 2009 Dodge Caliber Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2009 Dodge Caliber Slave Cylinder Part Number: 68033396AA
Product Specifications
- Other Name: Actuator - Clutch; Clutch Slave Cylinder
- Replaces: 5037863AB
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.1 x 6.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033396AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2009 Dodge Caliber Clutch Slave Cylinder Parts and Q&A

Q: How to Service a Clutch Slave Cylinder on 2009 Dodge Caliber?
A: When servicing the Clutch Slave Cylinder, make sure brake fluid is added to the max line and the cap is tight on the reservoir to protect the Clutch Master from draining out during removal. To start, take out the transaxle from the car. After that, release the hydraulic line (6) connected to the bleeder assembly (2) and next detach the bleeder assembly (2) from the master cylinder (3). At last, take away the slave cylinder-to-clutch bellhousing bolts (4) and free the slave cylinder (3) from the inside of the transaxle.