How to Remove the Rear Engine Timing Cover on 2009 Dodge Challenger?

Before changing the rear engine timing cover, first cut off the negative cable from the battery and drain the cooling system. After that, take out the timing belt and both of the right and left camshaft sprockets. Loosen the three fastening bolts on the pulley and move the steering pump into position. Take the time to lift and hold the vehicle, then remove the front belly pan. Get rid of the most visible mounting bolt on the generator before removing the bolt fastening the generator bracket. Remove the lower bolts, offering more space to lift the generator bolts up. Carefully loosen the bolt that holds the back of the A/C compressor and transmission cooler line to the engine, so you don't damage the cooler lines. Reattach the A/C compressor and take out the mounting bolts of the water pump before you remove it. Last, extract the bolts and nuts from the rear timing belt cover and remove the cover. Replace the O-rings at the connections between the water pump passages and the cylinder block, since they aren't meant to be used again.

OEM 2009 Dodge Challenger Timing Cover

Engine Timing Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Timing Covers found

View related parts
2009 Dodge Challenger Front Cover, Upper Outer Part Number: 4792797AD
$41.28 MSRP: $47.35
You Save: $6.07 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover, Outer Upper; Outer Timing Cover; Cover Timing Belt; Cover Timing Case; Timing Cover
- Position: Upper Outer
- Item Weight: 6.10 Pounds
- Item Dimensions: 33.6 x 22.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792797AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS
View related parts
2009 Dodge Challenger Timing Cover Part Number: 68416971AB
$349.23 MSRP: $515.00
You Save: $165.77 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover; Front Cover; Cover Timing Case
- Replaces: 68416971AA, 53022096AI, 4893864AA, 53022096AH
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68416971AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2009 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT8, Scat Pack, Scat Pack 392 Widebody, T/A, T/A 392, T/A 392 Widebody | 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
2009 Dodge Challenger Front Cover, Lower Outer Part Number: 4792897AC
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover, Outer Lower; Outer Timing Cover; Cover Timing Belt; Cover Timing Case; Timing Cover
- Position: Lower Outer
- Item Weight: 2.40 Pounds
- Item Dimensions: 14.4 x 10.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792897AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS
View related parts
2009 Dodge Challenger Front Cover, Inner Part Number: 4792924AC
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover, Inner; Inner Timing Cover; Cover Timing Case; Timing Cover
- Position: Inner
- Item Weight: 10.00 Pounds
- Item Dimensions: 27.4 x 15.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792924AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- SE | 6 Cyl 3.5 L GAS
View related parts
2009 Dodge Challenger Timing Cover Part Number: 4792795AD
Product Specifications
- Other Name: Cover - Timing Case; Engine Timing Cover; Front Cover; Cover Timing Case
- Item Weight: 15.70 Pounds
- Item Dimensions: 19.6 x 20.0 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792795AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Challenger Submodels:
- SRT8 | 8 Cyl 6.1 L GAS

2009 Dodge Challenger Timing Cover Parts and Q&A

Q: How to Remove the Rear Engine Timing Cover on 2009 Dodge Challenger?
A: Before changing the rear engine timing cover, first cut off the negative cable from the battery and drain the cooling system. After that, take out the timing belt and both of the right and left camshaft sprockets. Loosen the three fastening bolts on the pulley and move the steering pump into position. Take the time to lift and hold the vehicle, then remove the front belly pan. Get rid of the most visible mounting bolt on the generator before removing the bolt fastening the generator bracket. Remove the lower bolts, offering more space to lift the generator bolts up. Carefully loosen the bolt that holds the back of the A/C compressor and transmission cooler line to the engine, so you don't damage the cooler lines. Reattach the A/C compressor and take out the mounting bolts of the water pump before you remove it. Last, extract the bolts and nuts from the rear timing belt cover and remove the cover. Replace the O-rings at the connections between the water pump passages and the cylinder block, since they aren't meant to be used again.