How to Remove and Replace a Brake Master Cylinder with ESP on 2009 Dodge Durango?

To install ESP to substitute the brake master cylinder, before installation, it should be bled. Ensure that the brake booster output rod is in place. Look to see if it has a vacuum seal, and then fit the master cylinder, ensuring that it is aligned to the output rod. Install parts again, screw tighteners, and reconnect low fluid level switch.

OEM 2009 Dodge Durango Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2009 Dodge Durango Master Cylinder Assembly Part Number: 68046474AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 5.00 Pounds
- Item Dimensions: 7.1 x 6.7 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68046474AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Dodge Durango Master Cylinder Part Number: 5179926AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Assembly
- Replaces: 5179926AA, 68003625AA
- Item Weight: 3.30 Pounds
- Item Dimensions: 11.7 x 9.9 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179926AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Dodge Durango Brake Master Cylinder Parts and Q&A

Q: How to Remove and Replace a Brake Master Cylinder with ESP on 2009 Dodge Durango?
A: To install ESP to substitute the brake master cylinder, before installation, it should be bled. Ensure that the brake booster output rod is in place. Look to see if it has a vacuum seal, and then fit the master cylinder, ensuring that it is aligned to the output rod. Install parts again, screw tighteners, and reconnect low fluid level switch.