How to Install a Knock Sensor on a 3.7L Engine on 2009 Dodge Durango?

First, locate the knock sensor on the left side using its tag and the larger bolt, then make sure the PCM knows the right position for the sensors so you don't mix them up. First, clean the places in the cylinder block where the sensors are supposed to fit, then install the sensors. Over- or under-tightening the sensor bolts may harm the performance of the knock sensor and spark, so always use the proper torque of 15 +/- 2 ft.lbs. (20 Nm) (176 in.lbs) when fastening with 8mm bolts. Please pay attention that the foam on the bolts is not for use with any special adhesive, sealant or thread locking type of product once at full assembly. Screw in the last mounting bolts before routing the knock sensor wiring harness to the engine harness at the back of the intake manifold and then install the intake manifold.

OEM 2009 Dodge Durango Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2009 Dodge Durango Knock Sensor Part Number: 4606093AF
$119.31 MSRP: $182.00
You Save: $62.69 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Throttle Sensor; Sensor Knock
- Replaces: 4606093AC, 4606093AE
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 3.4 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, SXT | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2009 Dodge Durango Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Durango Submodels:
- Adventurer, Citadel, Crew, GT, Limited, Limited Hybrid, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SE, SLT, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, ST, SXT, Special Service | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS

2009 Dodge Durango Knock Sensor Parts and Q&A

Q: How to Install a Knock Sensor on a 3.7L Engine on 2009 Dodge Durango?
A: First, locate the knock sensor on the left side using its tag and the larger bolt, then make sure the PCM knows the right position for the sensors so you don't mix them up. First, clean the places in the cylinder block where the sensors are supposed to fit, then install the sensors. Over- or under-tightening the sensor bolts may harm the performance of the knock sensor and spark, so always use the proper torque of 15 +/- 2 ft.lbs. (20 Nm) (176 in.lbs) when fastening with 8mm bolts. Please pay attention that the foam on the bolts is not for use with any special adhesive, sealant or thread locking type of product once at full assembly. Screw in the last mounting bolts before routing the knock sensor wiring harness to the engine harness at the back of the intake manifold and then install the intake manifold.