How to Service and Repair a Coolant Reservoir in a Non-Pressure System on 2009 Dodge Nitro?

Before servicing or repairing the coolant reservoir in a non-pressure system, position the coolant recovery tank. Slide in 5 screws, setting 3 at the top and 2 at the road lower edges of the reservoir and one each on both sides. Tighten the two washer pump hoses, attach the coolant recovery hose and place the electrical connector from the combination coolant recovery/washer fluid reservoir assembly. In the end, connect the negative battery cable to its point.

OEM 2009 Dodge Nitro Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2009 Dodge Nitro Reservoir Tank Part Number: 68004868AC
$241.43 MSRP: $342.00
You Save: $100.57 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bottle - Washer And Coolant; Engine Coolant Reservoir; Washer Fluid Reservoir; Reservoir; Bottle Coolant Reserve & Washer Fluid; Reservoir Washer And Coolant; Coolant Reservoir
- Replaces: 68004868AA, 68004868AB
- Item Weight: 2.70 Pounds
- Item Dimensions: 30.3 x 10.5 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68004868AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2009 Dodge Nitro Coolant Reservoir Parts and Q&A

Q: How to Service and Repair a Coolant Reservoir in a Non-Pressure System on 2009 Dodge Nitro?
A: Before servicing or repairing the coolant reservoir in a non-pressure system, position the coolant recovery tank. Slide in 5 screws, setting 3 at the top and 2 at the road lower edges of the reservoir and one each on both sides. Tighten the two washer pump hoses, attach the coolant recovery hose and place the electrical connector from the combination coolant recovery/washer fluid reservoir assembly. In the end, connect the negative battery cable to its point.