Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Dodge Nitro Water Pump

H2O Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

  • 2009 Dodge Nitro Water Pump - 4792968AF
    2009 Dodge Nitro Water Pump - 4792968AF
    2009 Dodge Nitro Water Pump Diagram - 4792968AF
    View related parts

    2009 Dodge Nitro Water Pump Part Number: 4792968AF

    $158.33 MSRP: $242.00
    You Save: $83.67 (35%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump
    • Replaces: 4792968AD
    • Item Weight: 3.30 Pounds
    • Item Dimensions: 4.8 x 6.0 x 10.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4792968AF
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Nitro Submodels:
    • Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS
  • 2009 Dodge Nitro Water Pump - 53022189AH
    2009 Dodge Nitro Water Pump - 53022189AH
    2009 Dodge Nitro Water Pump - 53022189AH
    2009 Dodge Nitro Water Pump - 53022189AH
    2009 Dodge Nitro Water Pump Diagram - 53022189AH
    View related parts

    2009 Dodge Nitro Water Pump Part Number: 53022189AH

    $179.01 MSRP: $267.00
    You Save: $87.99 (33%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
    • Replaces: 53022189AC, 53022189AD, 53022189AF, 5179734AA, 53021187AA, 53022058AA, 53022189AB, 53022189AA, 53022189AG
    • Item Weight: 5.60 Pounds
    • Item Dimensions: 7.7 x 8.3 x 8.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53022189AH
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2009 Dodge Nitro Submodels:
    • Heat, SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS

2009 Dodge Nitro Water Pump Parts and Q&A

  • Q: How to Remove and Replace a Water Pump on a 3.7L Engine on 2009 Dodge Nitro?
    A: Before you remove and replace the water pump on these engines, ensure the gasket mating surfaces are clean. After installing a new gasket, place the water pump, put the bolts in and tighten them to 54 Nm (40 ft. lbs.). Be sure that the water pump spins without touching or rubbing against the timing chain cover/case. Connect the lower radiator hose to the water pump, then lay the accessory drive belt over both pulleys. Assemble the upper fan shroud and fan blade/viscous fan drive components, so that the fan shroud's upper and lower parts are tightly together to ensure air passes through the radiator. Insert the two fan shroud to radiator screws and check that the fan blades are at minimum 25 millimeters from the fan shroud. Remove air from the cooling system, recharge it with fluid, reattach the negative battery cable and look out for any leaks in the cooling system.

Related 2009 Dodge Nitro Parts

Alternate Year Models

+
2008 Dodge Nitro Water Pump 2010 Dodge Nitro Water Pump