Other Name: Seal - Axle Drive Shaft; Drive Axle Shaft Seal, Rear, Rear Left, Rear Right; Wheel Seal; Axle Seals; Differential Cover Seal; Seal; Seal Axle Drive Shaft
Position: Rear Driver Side
Item Weight: 0.50 Pounds
Item Dimensions: 0.8 x 3.0 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52111198AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2009 Dodge Ram 1500 Submodels:
Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2009 Dodge Ram 1500 Axle Shaft Seal Parts and Q&A
Q: How to Properly Install an Axle Shaft Seal on 2009 Dodge Ram 1500?
A: You should begin by washing the axle tube bore and making sure all older sealer or burrs are gone before you put in the axle shaft seal. Then, apply axle lubricant to the new seal's lip and install it with C-4076-B and Handle C-4735, making sure the depth is right at the moment it meets the axle tube. When the seal is put in, mount the axle shaft (1) and then fit the differential cover and fill it with gear lubricant up to the bottom of the plug's hole.