How to Locate and Remove the Camshaft Position Sensor on 2009 Dodge Ram 2500?

The Camshaft Position Sensor (CMP) is fitted on the right hand side of the timing gear/chain cover, under the generator. In order to remove it, disconnect the electrical connector, unscrew the mounting bolt and twist the sensor out of the cover carefully, checking the state of the O-ring.

OEM 2009 Dodge Ram 2500 Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2009 Dodge Ram 2500 Camshaft Position Sensor Part Number: 5149054AC
$34.88 MSRP: $51.70
You Save: $16.82 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Cam Sensor; Sensor Camshaft
- Replaces: 5149054AA, 5149054AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.1 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149054AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, TRX | 8 Cyl 5.7 L GAS
View related parts
2009 Dodge Ram 2500 Crankshaft Position Sensor Part Number: 68526830AA
$164.29 MSRP: $244.00
You Save: $79.71 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft/Camshaft Position; Engine Camshaft & Crankshaft Position Sensor.; Crankshaft Sensor; Camshaft Sensor
- Replaced by: 68526830AB
- Replaces: 5093101AA, 5179099AB, 5179099AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68526830AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL

2009 Dodge Ram 2500 Camshaft Position Sensor Parts and Q&A

Q: How to Locate and Remove the Camshaft Position Sensor on 2009 Dodge Ram 2500?
A: The Camshaft Position Sensor (CMP) is fitted on the right hand side of the timing gear/chain cover, under the generator. In order to remove it, disconnect the electrical connector, unscrew the mounting bolt and twist the sensor out of the cover carefully, checking the state of the O-ring.